My B40 project

Here you can publish Your projects bikes.
Only BSA singles

Moderator: minetymenace

Post Reply
Siddley
>10
>10
Posts: 15
Joined: Sun May 15, 2016 12:10 pm
Location: Notts, England
Has thanked: 0
Been thanked: 0
Flag: England

My B40 project

Post by Siddley » Thu Aug 03, 2017 12:31 am

Loosely assembled, just to make some decisions about the style of the bike...and yes, it's in the kitchen :grin:

Image

midgie
>1200
>1200
Posts: 1267
Joined: Fri Jul 30, 2010 7:50 pm
Location: church crookham hants
Has thanked: 1 time
Been thanked: 0
Flag: England

Re: My B40 project

Post by midgie » Thu Aug 03, 2017 8:56 am

looks good siddley, nothing wrong with building a bike indoors if you can get away with it. I built a tr5t in the living room when I lived in a one bedroom flat on the top floor. it was going great until I put the wheels in, but then I couldn't see the telly!

User avatar
minetymenace
Gerry1
Gerry1
Posts: 7319
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Has thanked: 11 times
Been thanked: 42 times
Flag: England
Contact:

Re: My B40 project

Post by minetymenace » Thu Aug 03, 2017 7:31 pm

A yellow vacuum, not a woman's tool that :shock:

Every room should have some sort of two wheeled reference :lol:
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.

beat
>1400
>1400
Posts: 5458
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 21 times
Flag: Switzerland

Re: My B40 project

Post by beat » Thu Aug 03, 2017 9:01 pm

it seams to come good

but : - isn't there the oil missing in the gearbox :?: :?:

;-)

User avatar
minetymenace
Gerry1
Gerry1
Posts: 7319
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Has thanked: 11 times
Been thanked: 42 times
Flag: England
Contact:

Re: My B40 project

Post by minetymenace » Thu Aug 03, 2017 9:24 pm

air bearings beat, frictionless air bearings...
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.

beat
>1400
>1400
Posts: 5458
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 21 times
Flag: Switzerland

Re: My B40 project

Post by beat » Fri Aug 04, 2017 8:53 pm

minetymenace wrote:air bearings beat, frictionless air bearings...
:shock: :shock: :shock:
so this will be the first <069 with a AIR puddle under neath ....

:thumb :thumb

Siddley
>10
>10
Posts: 15
Joined: Sun May 15, 2016 12:10 pm
Location: Notts, England
Has thanked: 0
Been thanked: 0
Flag: England

Re: My B40 project

Post by Siddley » Fri Aug 04, 2017 10:43 pm

beat wrote:it seams to come good

but : - isn't there the oil missing in the gearbox :?: :?:

;-)
That's OK, there isn't a crankshaft either :D

Siddley
>10
>10
Posts: 15
Joined: Sun May 15, 2016 12:10 pm
Location: Notts, England
Has thanked: 0
Been thanked: 0
Flag: England

Re: My B40 project

Post by Siddley » Fri Aug 04, 2017 10:44 pm

minetymenace wrote:A yellow vacuum, not a woman's tool that :shock:
That's either the workshop vac or the electric supercharger :grin:

Post Reply