RR's Tappet Clearance?

Here you can talk about all kind of TECH for the B50 B44 B25 And Other BSA unit Singles

Moderator: minetymenace

Post Reply
Ubert767
>80
>80
Posts: 86
Joined: Sat Oct 22, 2016 5:28 pm
Location: Dorset UK
Has thanked: 0
Been thanked: 0
Flag: England

RR's Tappet Clearance?

Post by Ubert767 » Mon Jul 08, 2019 8:56 am

Gentlemen,
Would I be wrong to interpret Rupert Ratio's "touchy feely" guide for adjusting the tappet clearance on my B44VS as 0.006" for the exhaust valve and 0.003" for the inlet valve?
Thanks,
Rob
Top
User avatar
kommando
>1400
>1400
Posts: 1949
Joined: Mon May 24, 2004 8:41 pm
Location: Scotland
Has thanked: 9 times
Been thanked: 49 times
Flag: Ireland

Re: RR's Tappet Clearance?

Post by kommando » Mon Jul 08, 2019 9:58 pm

More like 2 and 1.
Top
Ubert767
>80
>80
Posts: 86
Joined: Sat Oct 22, 2016 5:28 pm
Location: Dorset UK
Has thanked: 0
Been thanked: 0
Flag: England

Re: RR's Tappet Clearance?

Post by Ubert767 » Tue Jul 09, 2019 10:52 am

:thumb Many thanks, Kommando.

Rob
Top
User avatar
Didlydon
>40
>40
Posts: 59
Joined: Tue Nov 15, 2016 12:27 pm
Location: Broadstairs, Kent
Has thanked: 0
Been thanked: 0
Flag: Great Britain

Re: RR's Tappet Clearance?

Post by Didlydon » Fri Jul 12, 2019 12:43 pm

I use this method on my B44 Victor Special & seems to reduce the old top end clatter with no ill effects....
Top
Post Reply

Return to “Tech”