Spacer plate

Here you can talk about all kind of TECH for the B50 B44 B25 And Other BSA unit Singles

Moderator: minetymenace

Post Reply
fastharry
>120
>120
Posts: 139
Joined: Tue Dec 14, 2010 9:40 am
Location: Leicester England
Has thanked: 0
Been thanked: 1 time
Flag: England

Spacer plate

Post by fastharry » Thu Jul 18, 2019 9:58 am

Can anyone help with identifying this cylinder spacer, It has a bore of 88mm x 14mm thick, stud spacing of 73mm centre's or 2 7/8th,
Attachments
20190718_092731.jpg

User avatar
minetymenace
Gerry1
Gerry1
Posts: 7311
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Has thanked: 11 times
Been thanked: 41 times
Flag: England
Contact:

Re: Spacer plate

Post by minetymenace » Thu Jul 18, 2019 10:02 am

Assuming they are approx measurements, looks like 1/2" spacer used on B50s with long rods...
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.

fastharry
>120
>120
Posts: 139
Joined: Tue Dec 14, 2010 9:40 am
Location: Leicester England
Has thanked: 0
Been thanked: 1 time
Flag: England

Re: Spacer plate

Post by fastharry » Thu Jul 18, 2019 10:39 am

Not sure its for a B50 as the bore would leave 2mm wall thickness for the liner, i don't have the stud pattern measurements for a B50, but i tried it on a B44 and the spacer was smaller. I seem to have created 2 posts because my first would not go through but it seems it now has, is it possible to delete the other one?

Edit by MM: Your wish is my command...done :)

midgie
>1200
>1200
Posts: 1267
Joined: Fri Jul 30, 2010 7:50 pm
Location: church crookham hants
Has thanked: 1 time
Been thanked: 0
Flag: England

Re: Spacer plate

Post by midgie » Thu Jul 18, 2019 4:25 pm

B50 stud centre's are approx 80mm.

Post Reply