ccm oiling coversion

Moderator: minetymenace

Forum rules
Please write in easy English so everybody understand.
Post Reply
bajatr25w
>10
>10
Posts: 13
Joined: Sat Feb 08, 2014 8:49 am
Location: chula vista ca
Has thanked: 0
Been thanked: 0

ccm oiling coversion

Post by bajatr25w » Tue Feb 11, 2014 5:27 am

In the tech pages there is a conversion to what they call a CCM oiling conversion,,put an outlet with hose where the oil gauge should be and connect to the rocker feed pipe,has anyone done this ?, does it actually provide better oiling .

User avatar
Ian Hingley
>1400
>1400
Posts: 1989
Joined: Sat Jun 30, 2007 2:50 pm
Location: Bristol, UK
Has thanked: 5 times
Been thanked: 6 times
Flag: Sao Tome & Principe

Re: ccm oiling coversion

Post by Ian Hingley » Tue Feb 11, 2014 8:49 am

Hi baja

Loads of people have done this. Feed to the rockers is now from the clean, pressure side of the system rather than the return side.

Mark Cook (click the CCM-Britain icon on the above right) will have all the bits in stock.

Ian
66 BSA Victor Enduro, 72 BSA Lightning, 62 BSA B40 trials, 89 H*nda Bros 650, 96 Aprilia Moto 6.5, 2000 Aprilia Moto 6.5

User avatar
Chris Pellett
>1000
>1000
Posts: 1061
Joined: Mon Oct 11, 2004 4:18 pm
Location: Sussex
Has thanked: 1 time
Been thanked: 0
Flag: Great Britain
Contact:

Re: ccm oiling coversion

Post by Chris Pellett » Tue Feb 11, 2014 7:06 pm

Might not be good for the 250 though which requires all the pressure it can get for the shell big end

midgie
>1200
>1200
Posts: 1274
Joined: Fri Jul 30, 2010 7:50 pm
Location: church crookham hants
Has thanked: 3 times
Been thanked: 0
Flag: England

Re: ccm oiling coversion

Post by midgie » Tue Feb 11, 2014 9:01 pm

Chris Pellett wrote:Might not be good for the 250 though which requires all the pressure it can get for the shell big end
spot on chris,everyone just loves to depart from standard,then wonder why things go wrong if it needed it im sure bsa would have done it. regards midgie.

Post Reply