Remove engine from frame

Moderator: minetymenace

Forum rules
Please write in easy English so everybody understand.
Post Reply
User avatar
b50root
Site Admin
Site Admin
Posts: 3306
Joined: Mon May 24, 2004 12:44 pm
Location: Malmö Scania Sweden
Has thanked: 57 times
Been thanked: 8 times
Flag: Scania Sweden
Contact:

Remove engine from frame

Post by b50root » Wed Apr 14, 2010 8:38 am

You have to remove the engine from the frame on the left side of the frame!!

The two spacers should be on the right side of the engine when you mount.

Rickard
nebrer on EBAY
nebrer at skype ( http://www.skype.com )

User avatar
Who
>340
>340
Posts: 348
Joined: Sat May 09, 2009 5:51 pm
Location: Finland
Has thanked: 0
Been thanked: 0

Re: Remove engine from frame

Post by Who » Tue Nov 23, 2010 10:25 am

Could somebody put here the spacers original thickness?? please

User avatar
AJ CCM
>260
>260
Posts: 271
Joined: Wed Jul 14, 2010 10:56 pm
Location: SHROPSHIRE ENGLAND
Has thanked: 0
Been thanked: 0
Flag: England

Re: Remove engine from frame

Post by AJ CCM » Thu Nov 25, 2010 9:04 pm

On the CCM B50 the spacers are 19.2mm Diameter 5mm long & 48mm long.
hope this helps
Regards AJ CCM

User avatar
steve m
>1400
>1400
Posts: 2390
Joined: Sun May 06, 2007 3:22 am
Location: melbourne, australia
Has thanked: 0
Been thanked: 0

Re: Remove engine from frame

Post by steve m » Thu Nov 25, 2010 11:55 pm

who,
you might find this topic interesting.

viewtopic.php?f=3&t=1910&start=0&hilit=engine+spacer

steve

Post Reply