Remove engine from frame

Moderator: minetymenace

Forum rules
Please write in easy English so everybody understand.
Post Reply
User avatar
b50root
Site Admin
Site Admin
Posts: 3325
Joined: Mon May 24, 2004 12:44 pm
Location: Malmö Scania Sweden
Contact:

Remove engine from frame

Post by b50root »

You have to remove the engine from the frame on the left side of the frame!!

The two spacers should be on the right side of the engine when you mount.

Rickard
nebrer on EBAY
nebrer at skype ( http://www.skype.com )
User avatar
Who
>340
>340
Posts: 348
Joined: Sat May 09, 2009 5:51 pm
Location: Finland

Re: Remove engine from frame

Post by Who »

Could somebody put here the spacers original thickness?? please
User avatar
AJ CCM
>260
>260
Posts: 271
Joined: Wed Jul 14, 2010 10:56 pm
Location: SHROPSHIRE ENGLAND

Re: Remove engine from frame

Post by AJ CCM »

On the CCM B50 the spacers are 19.2mm Diameter 5mm long & 48mm long.
hope this helps
Regards AJ CCM
User avatar
steve m
>1400
>1400
Posts: 2390
Joined: Sun May 06, 2007 3:22 am
Location: melbourne, australia

Re: Remove engine from frame

Post by steve m »

who,
you might find this topic interesting.

viewtopic.php?f=3&t=1910&start=0&hilit=engine+spacer

steve
Post Reply