Gentlemen,
Would I be wrong to interpret Rupert Ratio's "touchy feely" guide for adjusting the tappet clearance on my B44VS as 0.006" for the exhaust valve and 0.003" for the inlet valve?
Thanks,
Rob
RR's Tappet Clearance?
Moderator: minetymenace
Re: RR's Tappet Clearance?
More like 2 and 1.
Re: RR's Tappet Clearance?

Rob
Re: RR's Tappet Clearance?
I use this method on my B44 Victor Special & seems to reduce the old top end clatter with no ill effects....