Rear Hub?

Here you can talk about all kind of TECH for the B50 B44 B25 And Other BSA unit Singles

Moderator: minetymenace

Post Reply
johnu
>200
>200
Posts: 208
Joined: Wed Mar 13, 2019 11:18 pm
Location: Redlands California

Rear Hub?

Post by johnu »

Just getting started with my wheel disassembly and was wondering if there should be a threaded spacer on my rear hub similar to the front hub. It is threaded but there is just the bearing in there. 74 tr5mx.
IMG_5723.jpg
KTM 350sxf
KTM 500exc
BSA A10 Road Rocket (RGS Rep)
TR5mx
S*zuki GT500
mlb50
>220
>220
Posts: 227
Joined: Wed Jun 25, 2014 4:25 am
Location: Perth, West Australia

Re: Rear Hub?

Post by mlb50 »

Yes, there should be a threaded collar. Its job is to retain the bearing and keep grease on the inside. Its a ring with peg holes to tighten it up.
B50 @ 10:1 - what's a leg between friends?
User avatar
minetymenace
Gerry1
Gerry1
Posts: 7730
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Contact:

Re: Rear Hub?

Post by minetymenace »

No. 1

Rear Hub.JPG
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.
Post Reply